$49.99
進化 2020 框架 是 Evolution 系列中的新套件,它針對的是不需要使用任何外部光學元件(如鏡頭或濾鏡)的年輕電話攝影師。 框架套件沒有光學模組,這就是為什麼更輕巧,更便宜。
[vc_row][vc_column][vc_column_text]進化 2020 框架 是進化系列的新套件,它的目標是年輕的電話攝影師誰不需要使用任何外部光學,如鏡頭或篩檢程式。 對他們來說,框架套件沒有光學模組,這就是為什麼更輕,更便宜。
FRAME套件採用新的增強型鋁履帶、兩個帶垂直/水平可選拍攝佈局的模製兩個手機夾以及一組連接附件。 所以,你會得到相同的夢想抓地GRIP力品質視頻鑽機只需49美元。 之後,Rig 套件可以升級,並有更多的擴展,以滿足更成熟的內容創建者的特定需求。
框架套件也是支援專業工作室設置中第二或第三台攝像機的一個不錯的選擇。
夢想抓地力進化框架通用模組化視頻鑽機 – 拍攝的情況下配備了2個穩定握把,2軌道,2智能手機支架,三腳架適配器絕對相容iPhone 11 Pro-Max-XS,三星,谷歌圖元,華為等。[/vc_column_text][/vc_column][/vc_row]
1. 新的增強軌道
2. 模制雙注射組合塑膠握把帶鋁冷鞋
3.帶可旋轉連接器的可塑螺釘可調夾緊支架
4.用於手機/電源的模制彈簧通用夾板支架
5.L 形支架,用於垂直/水平電話位置
6. 1/4″ 原始模制螺栓螺釘
7. 1/4″ 雙螺栓,帶兩個矽膠墊片
8.1/4″ 原始螺母
9.快速入門指南
10.通用緊湊型零售禮品盒
– 包裝 +夢想抓地力禮品盒
– 材料 + 高檔輕鋁
The trademark, the global patents, the concept, the design and mechanical solution of DREAMGRIP™ is respectful intellectual property of MXS Overseas Ltd.
aash aaron –
Does what it says it should!
VioletteVerse –
easy to set up works well with the rebel t5ieasy to take down.helps stabilize the camera while moving with it
Amazon Kunde –
Prima Konstruktion für nicht ganz so große Handy’s. Bei meinem 12pro Max im extremen Weitwinkelmodus und einem belegten Mikrofonanschluss muss man extrem aufpassen. Ansonsten sieht man schon mal die linken Fingerknöchel auf dem Video. Der rechte Griff kann wegen des Anschlusskabels auch nicht richtig umfasst werden. Ich wünsche mir die Option einer mindestens zehn Zentimeter längeren Schienenverbindung. Damit könnte man den Grip mit beiden Händen wieder vernünftig umfassen.
Roberto C. –
Prodotto perfetto…
Michael JC –
This is a pretty good assortment of pieces that can be used in many different configurations for attaching a multitude of different cameras, phones, and other assorted goodies via standard ¼” tripod mounting holes and a couple of cold shoe mounts. Everything feels solidly constructed and not at all flimsy. I like that you can use some or all of the pieces in any way you can think of in order to suit your specific needs.I also like that the two cell phone holders have wide, flat sides that enable them to hold a variety of different phones including ones in cases. I have a Moto g6 Play, and I use a Unicorn Beetle case (similar to an Otterbox), and it’s a pain to take it in and out of its case. So it’s nice that I can use this setup with my phone still in its case.As nice as this grip is, there are some areas for improvement. First, and most importantly, the cold shoe mounts do not fit with some of my lights. I have some basic lights that appear to be a pretty common design, so I think a lot of people could run into this issue. It seems like either the metal on the cold shoe mounts is too thick or goes in too far, which makes it impossible for me to slide the lights into place. I have not run into this issue with other cold shoe mounts, including the one on my point and shoot Sony RX100 ii camera. I had another light that does fit with these cold shoe mounts, so your mileage may vary here. I’ll include a picture of the both a light that won’t fit and a detachable piece that came with another light that does fit. The picture that includes the light itself is the one that does not fit.Another issue I have with this grip, albeit a minor one, is that I wish it had included some hardware for attaching a GoPro camera. Yes, this comes with a ton of bits with ¼” mounting screws, and I can get an adapter that goes between that and a GoPro mount, but it would be nice if it came with a couple of those. After all, it comes with two cell phone holders. And while you can fit a GoPro into one of those, I’d rather have something a little more secure (I’d say definitely don’t use the spring clamp for a GoPro unless you are putting all of this on a tripod and will be keeping it stationary. The other phone clamp tightens, so it might hold it a little more securely.).Additionally, one or two small tripods would be a nice addition, but that would also increase the price, so I understand not including them. Also, the snug foam insert is a little too snug. Granted, I’m probably not likely to completely disassemble after every use, so I’m not sure how often I’d use the insert and box anyway.
MyProductPortraits –
This is a good camera cage, even though it’s on the cheap side. This product comes with several knobs that provides plenty of adjustability and mounting options. Good handles with nice grip, aluminum rails that allow you to mount your cold shoe to any position. Very versatile.Overall this camera mount cage provides plenty of options and versatility, and if you’re working on a budget this is the product for you. Recommended.
S. –
I’m going to have to think about this thing for a while. I saw this and thought with all the different parts, this has to come in very handy-someday. Everything here is 1/4 inch, so is compatible with just about all camera tripods and mounting products around today. Basically this is a poor-man’s cage. I tried 3 different full size DSLR’s and they all fit between the rails just fine. The handles can be mounted in any of 5 different orientations and you can use either or both of the rails. There are 8 knobs with male/female threads, offering much of the versatility I alluded to at the start. One of the phone mounts is the spring type and the other is a threaded clamp version, each with the usual two threaded sockets. The handles have a nice solid feel and a somewhat soft texture for the finger grip.If I had a complaint about this thing, it would be that the packaging-it is TOO robust. Each item has a dedicated cutout in which it fits, and each is held tightly-very tightly. You have to pick the whole liner up out of the box and push the pieces from the back to get them out. Kind of a stupid thing to complain about, but it is annoying to have to use two hands to remove a part.I did an Amazon search for DreamGrip and it seems this is a junior version of their much more extensive (and expensive) Evolution series. It looks like they are trying to get professional equipment features into the hands of budding film makers. They offer a whole series of additional parts, mounts and devices that can be added to the handles and rails, and I would say that you can use an endless variety of your own equipment also. While the full blown kit looks like quite the thing, if you want to start somewhere but are on a limited budget, I think you can’t go wrong with this kit.